7600 Matte Black (onyx)
7600 Photo Black (onyx)
7900 Matte Black (onyx)
7900 Photo Black (onyx)
9600 Matte Black (onyx)
9600 Photo Black (onyx)
9800 Photo Black (onyx)
9800 Matte Black (onyx)
9900 Matte Black (onyx)
9900 Photo Black (onyx)
RGB – 7900/9900 Settings
– Allow whatever software you are printing with to manage colors
– Use the Phototex EP7900 (or 9900) UCHDmk_1400 profile
– In the printer’s dialogue screen, select Roll Paper, Watercolor Radiant White, Matte Black ink, Color Mode Off (No Color Management), Super Photo 1440 dpi, Super Microweave checked, High Speed Unchecked.
– Color density set to -18 (-20 results in a slightly faded image, -15 results with a bit of pooling in darker than middle gray tones), 5 for drying time.
1. Matte Black – Velvet Fine Art (preferred if you have a choice)
2. Photo Black – Luster 250
4880 – Try the Photo Quality Ink Jet Paper
USE NO PROFILES
SETTINGS: ULTRA SMOOTH FINE ART ,COLOR – MATTE BLACK ,COLOR DENSITY – 30%
DRYING TIME 5 SECONDS, PAPER FEED – 0, SUCTION – STANDARD PAPER THICKNESS – 3
MODE – CUSTOM, GAMMA – 2.2, COLOR CONTROLS
BRIGHTNESS, CONTRAST, SATURATION, CYAN (–O), MAGENTA (+5), YELLOW (-5)
Epson Surecolor T7000 – Using Enhance Matte setting seems to work wonderfully.
Solvent (ONX – Onyx) (CAL-Caldera)
PhotoTexS_HPL26500_792_CAL600 V9.2 may need to extract the profile (.calpatch file) from the zip before installing
HP L310/330/ 360 – otherwise try: HP matte adhesive vinyl profile, color looks great thru Onyx using Default CMYK as the input ICC & poster color as the rendering intent. While testing the roll further, ended up settling on 200 degrees for the curing temp at 10 pass.
other Z series Settings to try:
1. HP Hahnemhle Textured Fine Art Paper (brightest red, darkest black)
2. HP Professional Matte Canvas
3. HP Premium Instant Dry Gloss Photo Paper
ENABLE CUT: May need to open Media Explorer just double-click on the profile name and an edit window will pop-up.
***** Use a 60 degree Carbide Blade for best contour cutting results ****
Both the dual CMYK and the 6 color Below VS640. The 6 color would be loaded with CMYK, light cyan, light magenta and another Magenta & Cyan. The files are named as VS-640, but they cross-load with the 540 size as well. These are both for VersaWorks. Built in version 4.9.1, you should run the updater if at a lower version for those to come in ok.
SolJet Pro 4 XR-640 series:
Also printers like :
VP300 & VP540 – ORAJET 3640 MATTE WHITE paper setting we heard of very good results. MCVP Matte Calendared Vinyl on the 540 series also works well..
Roland GX Plotters – Carbide Blade 60 degree – Speed 7. Force 100. Turn on over travel. Keep sharp knife.